 |
| Counterline idesign additions |
 |
 |
idesign additions heated and ambient plate dispensers (heated)
- Self levelling plate dispensers.
- Heated and ambient units available.
- Accept plate sizes from 175mm to 295mm in diameter.
- Easily adjustable to accommodate a wide range of plate weights.
- Heated units controlled thermostatically.
- Designed to drop into a circular cut-out within countertop.
- Highest quality of finish to match display units.
- Low friction roller bearing plate supports.
- Mobile plate dispenser also available.
- Heated units supplied with 1000mm cable and 13amp plug without switch or neon, unit must be controlled through main counter body.
|
idesign additions roll-in base unit (heated)
- Avoid lifting heavy units into position and simply resolve condensing unit airflows.
- Available in 2/1, 3/1, 4/1 & 5/1 sizes.
- Allow easy change from heated to chilled display for varied menus.
- Accept all integrale, da vinci, and manhattan standard width displays.
- Roll-ins for heated displays have undercounter control panel and ambient shelving.
- Roll-ins for chilled displays have full internal airflow ducting with inlet and exhaust on operator's side, except for 2/1 which has air inlet on customer's side and exhaust on operator's side.
- Operator side and ends finished in satin polished stainless steel, customer side in zintec.
- Fully welded rigid construction.
- All units mounted on four 100mm diameter castors, two lockable.
- Height adjustable to either 855mm or 880mm.
|
 |
 |
idesign additions high capacity multideck (slimline)
- A range of self contained illuminated chilled display units particularly suited to sandwich and cold drink sales with a choice between four or five glass shelves.
- The range includes both narrow and wide-bodied versions, which accept either two or three standard sandwich packs across the width of each shelf.
- The displays incorporate their own base units and are supplied unfinished and ready to build into a shopfitted wall unit or front counter.
- The displays have an easily cleaned polished stainless steel interior with fully adjustable toughened glass shelves.
- Condensate is automatically evaporated eliminating the need for site drainage.
- Condensing unit mounted integrally. Designed for air in customer side and air discharge at rear. Non-standard airflows are available.
- A wide range of optional extras are available including: Glass edge protection, insulated night blind, lockable roller shutter exterior cladding packs and shelf edge ticket strips.
- Overall sizes below are for standard units only and do not include any optional extras. For further information and prices please contact our sales office team.
|
idesign additions high capacity multideck (tall)
- A range of self contained illuminated chilled display units particularly suited to sandwich and cold drink sales with a choice between four or five glass shelves.
- The range includes both narrow and wide-bodied versions, which accept either two or three standard sandwich packs across the width of each shelf.
- The displays incorporate their own base units and are supplied unfinished and ready to build into a shopfitted wall unit or front counter.
- The displays have an easily cleaned polished stainless steel interior with fully adjustable toughened glass shelves.
- Condensate is automatically evaporated eliminating the need for site drainage.
- Condensing unit mounted integrally. Designed for air in customer side and air discharge at rear. Non-standard airflows are available.
- A wide range of optional extras are available including: Glass edge protection, insulated night blind, lockable roller shutter exterior cladding packs and shelf edge ticket strips.
- Overall sizes below are for standard units only and do not include any optional extras. For further information and prices please contact our sales office team.
|
|
 |
design additions roll-in base unit (chilled)
- Avoid lifting heavy units into position and simply resolve condensing unit airflows.
- Available in 2/1, 3/1, 4/1 & 5/1 sizes.
- Allow easy change from heated to chilled display for varied menus.
- Accept all integrale, da vinci, and manhattan standard width displays.
- Roll-ins for heated displays have undercounter control panel and ambient shelving.
- Roll-ins for chilled displays have full internal airflow ducting with inlet and exhaust on operator's side, except for 2/1 which has air inlet on customer's side and exhaust on operator's side.
- Operator side and ends finished in satin polished stainless steel, customer side in zintec.
- Fully welded rigid construction.
- All units mounted on four 100mm diameter castors, two lockable.
- Height adjustable to either 855mm or 880mm.
|
idesign additions heated and ambient plate dispensers (ambient)
- Self levelling plate dispensers.
- Heated and ambient units available.
- Accept plate sizes from 175mm to 295mm in diameter.
- Easily adjustable to accommodate a wide range of plate weights.
- Heated units controlled thermostatically.
- Designed to drop into a circular cut-out within countertop.
- Highest quality of finish to match display units.
- Low friction roller bearing plate supports.
- Mobile plate dispenser also available.
- Heated units supplied with 1000mm cable and 13amp plug without switch or neon, unit must be controlled through main counter body.
|
 |
 |
idesign additions bain marie drop-in options, single hot ceran
- Available in 1/1 gastronorm size.
- For display of pre-heated food in ceramic or oven to table type dishes.
|
idesign additions bain marie drop-in options, rectangular carving pad
- Rectangular spiked vitreous enamelled cast iron carving pad.
- Available in 1/1 gastronorm size.
- Juice collection channel with central spiked area for carving.
|
 |
 |
idesign additions bain marie drop-in options, circular carving pad
- 300 mm diameter spiked vitreous enamelled cast iron carving pad.
- Adaptor plate to accept carving pad and two 1/6 gn containers.
- Containers included.
- Locates into 1/1 gn bain marie cut-out.
|
idesign additions heated display duo soup unit
- The Duo comes with two circular 5 litre stainless steel containers complete with lids.
- Thermostatically controlled.
|
 |
 |
idesign additions hot cupboard
- Roll under mobile hot cupboard.
- Includes midshelf and sliding doors as standard.
- Supplied with 1500mm lead and 13amp plug top.
|
idesign additions bing pad
- The chopping board is a part of a complementary range of optional extras for use with the idesign ranges.
- Specific to the chilled deli and chilled deck displays, it simply clips onto the rear preparation shelf.
|
 |
|
idesign additions high capacity multideck (chilled)
- A range of self contained illuminated chilled display units particularly suited to sandwich and cold drink sales with a choice between four or five glass shelves.
- The range includes both narrow and wide-bodied versions, which accept either two or three standard sandwich packs across the width of each shelf.
- The displays incorporate their own base units and are supplied unfinished and ready to build into a shopfitted wall unit or front counter.
- The displays have an easily cleaned polished stainless steel interior with fully adjustable toughened glass shelves.
- Condensate is automatically evaporated eliminating the need for site drainage.
- Condensing unit mounted integrally. Designed for air in customer side and air discharge at rear. Non-standard airflows are available.
- A wide range of optional extras are available including: Glass edge protection, insulated night blind, lockable roller shutter exterior cladding packs and shelf edge ticket strips.
- Overall sizes below are for standard units only and do not include any optional extras. For further information and prices please contact our sales office team.
|
idesign additions heated display soup unit
- The soup bain marie has a 2/3 gastronorm cut-out, holding one 2/3 or two 1/3 gastronorm containers up to 150mm deep.
- 2 x 1/3 gn containers with lids included as standard.
- Thermostatically controlled.
- Integral drip tray.
|
 |
|
